Call US
Centsys D20 Smart

Centsys D20 Smart

When serious security is required, only real strength will do—and no one delivers it better than the leader in access automation. Meet the all-new D20 SMART industrial sliding gate motor. Built for high-volume sites, it provides uncompromising security and unstoppable performance, even where other motors fall short. For power you can trust, make the smart choice with the D20 SMART.

Enquire
View All Products

Product Features

Main Features:

  • Strong enough to move a 2t gate
  • Easy “drop-in” replacement for existing A10 sites
  • Installer-friendly design with easy access to mounting hardware, optimised cable routing and a dedicated accessory tray
  • Smooth and strong
  • SMART hardware and SMART connectivity provide the best experience for installers
  • Intelligent theft and break-in protection with an integral vibration sensor and patented theft-deterrent cage
  • More space and dedicated accessory tray for complementary solutions such as GSM devices
  • World-class reliability with a sealed gearbox and improved, more secure manual release mechanism
  • Die-cast aluminium gearbox coupled with a high-torque DC motor built for pure power and performance
  • Uncompromising security, uninterrupted convenience with 24V battery backup
  • Instant access to advanced, in-app diagnostics and logs, monitoring system health in real time
  • Accurate and safe position control incorporating reliable Hall Effect technology
  • Improved wire routing
  • SMART universal controller – compatible with all CENTSYS SMART sliding gate operators

Specifications

DESCRIPTION D20 SMART
Input voltage 90V – 240V AC +/-10% @ 50Hz
Current consumption (Mains) 250mA
Battery charger current output 1.8A @ 27.4V +/-1%
Motor voltage 24V DC
Motor power supply Battery-driven (Standard Capacity – 2x 7.2Ah)
Current consumption (motor at rated load) 9A
Input / Output sink currents (Max accessory current draw)
I/O 1-4 100mA (12/24V)
I/O 5 and 6 3A (12/24V) 10sec Pulse
Motor push force – starting 52kgf
Motor push force – rated 39kgf
Gate mass – maximum 2000kg
Gate length – maximum 25m
Gate speed (varies with load) Up to 18m/min
Manual Override Lockable lever with key release
Drive Pinion 13T Module
Performance during battery backup (no mains power) with 2x 7.2Ah batteries Power Saving (15m/min 20kgf) | Normal (18m/min 20kgf)
Half day 101 | 55
Full day 80 | 45
Collision Sensing Electronic
Operating temperature range -15°C to +50°C
Onboard receiver type CENTSYS rolling code (Keelog encryption) multichannel
Receiver code storage capacity 1500 Remotes
Receiver frequency 433.92MHz
Degree of protection IP54
Mass of unit packed (with standard kit, but excl. rack and battery) 13Kg
Packaging dimensions (with standard kit, but excl. rack and battery) 350mm wide x 282mm deep x 470mm high

1. Can operate off a solar supply, consult your local dealer for assistance
2. Based on 25°C ambient temperature and unit not in direct sunlight
3. Based on a motor push force of less than 50% of rated (Starting and Running forces)
4. Gate opening and closing speeds can be configured to run slower depending on the requirements of individual installations
5. Can increase battery capacity for longer standby times
6. Based on 4m gate, excluding all accessories
7. Multiple buttons per remote can be used

Downloads

Centsys D20 Smart Brochure

Centsys D20 Smart Manual

Centsys D20 Smart Cheat Sheet

Centsys D20 SMART Data Sheet